Here you will find half masks for use with and without turbochargers
A filtering respirator may be a full or half mask with replaceable filter against particles and / or gases. If the filtering respirator is equipped with a battery-powered engine (turbo equipment) that blows the air through a filter, a hood may also be used as a facial part. Filtering respirators also exist as filtering face masks.
We are all highly dependent on the air we breathe is clean and good for us. We cannot always achieve this when we are working. Either the environment is dangerous and harmful to us, or we also work directly with hazardous chemicals, solvents, gases, paint products and the like. A 3M half mask is a good and fast solution to a challenge that requires respiratory protection. Equipment with appropriate filters and you are ready for work. Also, Sundström and Pureflo are quality fire when it comes to equipment with filter mask. Your protective mask must of course fit the work's purpose and workload. In Denmark we have 3 hours rule. Only work with filtering respirators 3 hours a day. More time than this requires a motor or a fresh air solution.
In addition, the half mask can also be used if it is comfortable and convenient. So, there are several half masks that can be used as a fresh air mask.
Then remember it or a respirator with a motor if your workload exceeds 3 hours a day.
Contact us in Stennevad for advice and close dialogue in relation to your and colleagues needs so that we find the most suitable filter mask for you. The 3M 4255 can be an ideal gas mask for you who work with solvents and paints. It closes well close to the mouth and nose but remember to shave off your beard before using a half-mask. For optimal protection, you need to be aware of how the face mask is sealed.
Whatever your needs, we will be ready with help and assistance in customer service or with a consultant.